PENTENS NPU-12 Water-based Polyurethane Nano Coating

PENTENS NPU-12 is a nanotechnology HDI based polyurethane coating of finest quality, durable, water repellent, fungus/algae/bacteria resistant, UV resistant, scratch resistant, anti-corrosive sealer, primer & finish for a wide variety of exterior and interior surfaces.


ADVANTAGES

  • Outstanding adhesion
  • High resistance to weathering and blistering
  • Excellent color retention
  • Zero VOC
  • Additional features like termite - free, stain resistant and anti-sticking
  • Easy clean-up

USES

Interior/Exterior applicable surfaces are including:
- Concrete
- Metal
- Stone
- Tile

PHYSICAL DATA

APPLICATION

Surface Preparation
Surface must be clean, smooth, dry, and free of wax, grease, oil, loose or peeling paint, and other foreign material.

Mixing
A part and B part must be mixed homogeneously prior to application, using an electrical or pneumatic power stirrer until a homoge-homogeneous mix is achieved.

Application
PENTENS NPU-12 should be applied to the prepared surface by using brush or lamb wool roller or spray equipment.
The second coat may be applied as soon as the first coat has initially dried (typically 4 to 6 hours). The time will be dependent on the type of surface and the ambient conditions.

Coverage
Approximately 6~10 square meters per kg, depending on the porosity of the substrate.​

SAFETY

Impervious gloves and barrier cream should be used when handling these products.
Eye protection should be worn. In case of contact with eyes, wash thoroughly with plenty of water and seek medical advice if symptoms persist.
If contact with skin occurs, it must be removed before curing takes place.
Wash off with an industrial skin clearer followed by plenty of soap and water. Do not use solvent.
Ensure adequate ventilation when using these products.​